Yes. Promat’s fire stopping products are subject to testing agencies such as ASTM, UL, DIN, EN, and BS
Yes. PROMAFOUR® can be painted but it is best practice to use a silicate-based paint since this paint will be resistant to the high temperatures expected around your fireplace. For a recommendation on which paint to use you can contact a Promat representative using the link below.
It is recommended to use a primer prior to painting PROMAFOUR® board for fireplaces. For a recommendation on which paint to use you can contact a Promat representative using the link below.
Promat products can be decorated using traditional methods. Please note, for decorating boards that are fixed around heating appliances or fireplaces the chosen finish must also be capable of withstanding exposure to high temperatures.
A complete video on how the PROMAFOUR® system is installed is available through the link below.
https://www.youtube.com/watch?v=VLqpB4vzebc&t=125s
You can also access the complete PROMAFOUR® Installer’s Guide at the link below.
PROMAFOUR® board for fireplaces should be used to encase fireplaces. PROMAFOUR® is a non-combustible, high-strength board that is the same thickness as drywall and eliminates cracking. For additional information on PROMAFOUR® follow the link below.
To cut PROMAFOUR® board for fireplaces you can use a circular saw, track saw, miter saw, or table saw. It is recommended to use a carbide-tipped saw blade since the board is partially composed of cement.
Promat offers PROMASEAL® intumescent fire stopping materials. These flexible and aesthetic seals offer superior protection against fire, smoke, and gas. PROMASEAL® is offered in a variety of sizes, colors, and finishings. Promat also offers PROMASIL® and PROMATECT® which are used in fire door cores.
Promat offers a variety of fire-stopping solutions including:
• Fire-resistant sprays and coatings for protecting beams and structures like PROMASPRAY® F5 and PROMASPRAY® P300/P400.
• Structural fire protection (passive fire protection) for steel beams, ceilings, walls and partitions using PROMATECT® fireproofing boards.
• Prevent the spread of flame, smoke, or gas using PROMASEAL® intumescent fire stopping materials.
• Blast protection and safety panels through DURASTEEL® for fire barriers, impact protection, heat shields, cable protection, and flue gas ducts.
Discover which solution is best for you by contacting a Promat representative below:
When installing PROMAFOUR® for fireplaces it is best practice to use the PROMAFOUR® studs, joint filler, and glue together as these products are all manufactured from the same raw materials. Therefore, they will expand and contract at the same rate during heat up and cool down, eliminating cracks around your fireplace. The PROMAFOUR® boards can be used with metal/wood studs, or off-the-shelf joint filler or glue but this does reduce the reliability of the overall system.
For safety data sheets for Promat products please go to the Document library and filter by "Safety Data Sheets" using the document filter on the lower left hand side of the page.
PROMAFOUR® products can be purchased through a distributor or retailer. If PROMAFOUR® is not offered in your area then you may purchase it directly from Promat Inc. in Maryville, TN. To see our distributor/retailer map click the link below.
All other Promat fire-stopping products can be purchased directly from Promat Inc. located in Maryville, TN. Click the link below to get in contact with a Promat representative.
Follow #Promat on social media: